Webhooks: A Practical Guide to Real-Time System Integration
Webhooks: A Practical Guide to Real-Time System Integration
Webhooks: A Practical Guide to Real-Time System Integration

Webhooks: A Practical Guide to Real-Time System Integration

By:

Shrilalipi Swain

30 May 2025

In modern software architecture, real-time communication between systems is a necessity. And Webhooks have appeared as a simple and effective method for applications to get updated information from other services instantly. In event-driven systems, it's more important due to the need of responsiveness and automation.

Webhook

What is a Webhook?

A webhook is used to send information from one system to another, in real time, as soon as a particular event happens. Rather than checking with an API at certain times, a webhook allows the source system to send data right away to a predetermined location.

For instance, you can use a webhook from Stripe so your application is informed when a payment is successful or unsuccessful. Thanks to this, you can make updates in real time to the order status, send emails or retry logic, with no need for repeated polling.

Webhooks vs. Polling

Criteria

Webhooks

Polling

Communication

Push based (event-driven)

Pull based (interval-driven)

Efficiency

High (send data when needed)

Low (repeatedly checks for update)

Latency

minimal (near real-time)

Higher (depends on polling frequency)

Server load

Low on server side

High on sender side (frequent requests)

Complexity

Requires listener setup

Easier to implement but less scalable

Webhooks and api polling

How Do Webhooks Work?

  1. Registration: At setup, the client application gives the user a URL to a third-party service during setup.

  2. Trigger Event: An event (e.g., user signup, transaction completed) occurs on the third-party platform.

  3. Delivery: The third-party service sends an HTTP POST request to the registered URL with the event’s details.

  4. Processing: The application receiving the request converts it and runs the necessary program.

  5. Response: The receiver signals that the request was received with a 2xx status code

Common Use Cases

  • Payemnt processing: Stripe or RazorPay notifying a system of all the transactions that were completed successfully.

  • CI/CD Pipeliness: GitHub sends out push event data to a build system as part of CI/CD Pipelines.

  • Email Services: SendGrid updates you when your emails are delivered or bounce back.

  • Communication Platforms: On Slack or Discord, bots are activated by messages or user interactions.

Best Practices for Implementing Webhooks

  1. Use HTTPS for safe communication
    All webhook endpoints need to use HTTPS to keep data secure as it travels.

  2. Check the identity of the person making the request
    A signature or token is usually included in the header by most providers. Check the authenticity of the product by validating it.

  3. Ensure Idempotence is followed
    Check that your webhook handler is able to handle duplicate requests without causing harm. This is necessary since certain services try to deliver again if the first attempt fails.

  4. Respond Quickly
    Send a 200 OK status right away to show the request was received. If a lot of processing is involved, handle it later with queues or background workers.

  5. Enter all incoming events into your log
    Record payloads, headers and timestamps for every time a webhook is received. It makes it easier to fix errors and follow compliance rules.

  6. Retries and Dead Letter Queues should be supported
    Delivery of webhooks cannot always be trusted. Either keep retrying the request or have a backup plan on the sending end.

Testing and Debugging Webhooks

  1. Local Development: Bring your local server online by using ngrok and get requests from the webhook.

  2. Provider Test Tools: Test tools are provided by many providers (e.g., Stripe CLI, GitHub Webhooks) to help test your endpoints

  3. Verbose Logging: When testing, log all the data in the request, response and headers to check your integration works correctly.

Common Pitfalls to Avoid

  • Security Issue: Not verifying webhook signatures allows malicious or fake requests to reach your system

  • Blocking Logic in Webhook Handlers: Long processing in a Webhook Handler can end in timeouts or retries. Do your work using asynchronous methods.

  • Insufficient Monitoring: If webhook monitoring is not done enough, it can cause serious effects for the business. Keep an eye on how often webhooks are successfully delivered.

Conclusion

It is easier and more effective to build real-time connections between systems using webhooks. If used wisely, they help workflows move faster, use less infrastructure and offer a better user experience.

Still, webhook consumers should be built keeping security, strength and visibility in mind. Applying best practices and handling common issues early on allows developers and teams to develop integrations that can adapt to the ongoing changes in today’s applications.


Frequently Asked Questions

Q. What is the main difference between webhooks and polling?

A. Webhooks are event-driven and push data in real time, while polling is interval-based and pulls data repeatedly, which increases server load and latency.

Q. Are webhooks secure for real-time communication?

A. Yes, webhooks are secure when you use HTTPS and verify signatures or tokens to authenticate requests and prevent malicious access.

Q. How can I handle failed webhook deliveries?

A. You should support retries and implement dead letter queues to manage failed deliveries and ensure data is not lost in webhook communication.

In modern software architecture, real-time communication between systems is a necessity. And Webhooks have appeared as a simple and effective method for applications to get updated information from other services instantly. In event-driven systems, it's more important due to the need of responsiveness and automation.

Webhook

What is a Webhook?

A webhook is used to send information from one system to another, in real time, as soon as a particular event happens. Rather than checking with an API at certain times, a webhook allows the source system to send data right away to a predetermined location.

For instance, you can use a webhook from Stripe so your application is informed when a payment is successful or unsuccessful. Thanks to this, you can make updates in real time to the order status, send emails or retry logic, with no need for repeated polling.

Webhooks vs. Polling

Criteria

Webhooks

Polling

Communication

Push based (event-driven)

Pull based (interval-driven)

Efficiency

High (send data when needed)

Low (repeatedly checks for update)

Latency

minimal (near real-time)

Higher (depends on polling frequency)

Server load

Low on server side

High on sender side (frequent requests)

Complexity

Requires listener setup

Easier to implement but less scalable

Webhooks and api polling

How Do Webhooks Work?

  1. Registration: At setup, the client application gives the user a URL to a third-party service during setup.

  2. Trigger Event: An event (e.g., user signup, transaction completed) occurs on the third-party platform.

  3. Delivery: The third-party service sends an HTTP POST request to the registered URL with the event’s details.

  4. Processing: The application receiving the request converts it and runs the necessary program.

  5. Response: The receiver signals that the request was received with a 2xx status code

Common Use Cases

  • Payemnt processing: Stripe or RazorPay notifying a system of all the transactions that were completed successfully.

  • CI/CD Pipeliness: GitHub sends out push event data to a build system as part of CI/CD Pipelines.

  • Email Services: SendGrid updates you when your emails are delivered or bounce back.

  • Communication Platforms: On Slack or Discord, bots are activated by messages or user interactions.

Best Practices for Implementing Webhooks

  1. Use HTTPS for safe communication
    All webhook endpoints need to use HTTPS to keep data secure as it travels.

  2. Check the identity of the person making the request
    A signature or token is usually included in the header by most providers. Check the authenticity of the product by validating it.

  3. Ensure Idempotence is followed
    Check that your webhook handler is able to handle duplicate requests without causing harm. This is necessary since certain services try to deliver again if the first attempt fails.

  4. Respond Quickly
    Send a 200 OK status right away to show the request was received. If a lot of processing is involved, handle it later with queues or background workers.

  5. Enter all incoming events into your log
    Record payloads, headers and timestamps for every time a webhook is received. It makes it easier to fix errors and follow compliance rules.

  6. Retries and Dead Letter Queues should be supported
    Delivery of webhooks cannot always be trusted. Either keep retrying the request or have a backup plan on the sending end.

Testing and Debugging Webhooks

  1. Local Development: Bring your local server online by using ngrok and get requests from the webhook.

  2. Provider Test Tools: Test tools are provided by many providers (e.g., Stripe CLI, GitHub Webhooks) to help test your endpoints

  3. Verbose Logging: When testing, log all the data in the request, response and headers to check your integration works correctly.

Common Pitfalls to Avoid

  • Security Issue: Not verifying webhook signatures allows malicious or fake requests to reach your system

  • Blocking Logic in Webhook Handlers: Long processing in a Webhook Handler can end in timeouts or retries. Do your work using asynchronous methods.

  • Insufficient Monitoring: If webhook monitoring is not done enough, it can cause serious effects for the business. Keep an eye on how often webhooks are successfully delivered.

Conclusion

It is easier and more effective to build real-time connections between systems using webhooks. If used wisely, they help workflows move faster, use less infrastructure and offer a better user experience.

Still, webhook consumers should be built keeping security, strength and visibility in mind. Applying best practices and handling common issues early on allows developers and teams to develop integrations that can adapt to the ongoing changes in today’s applications.


Frequently Asked Questions

Q. What is the main difference between webhooks and polling?

A. Webhooks are event-driven and push data in real time, while polling is interval-based and pulls data repeatedly, which increases server load and latency.

Q. Are webhooks secure for real-time communication?

A. Yes, webhooks are secure when you use HTTPS and verify signatures or tokens to authenticate requests and prevent malicious access.

Q. How can I handle failed webhook deliveries?

A. You should support retries and implement dead letter queues to manage failed deliveries and ensure data is not lost in webhook communication.

In modern software architecture, real-time communication between systems is a necessity. And Webhooks have appeared as a simple and effective method for applications to get updated information from other services instantly. In event-driven systems, it's more important due to the need of responsiveness and automation.

Webhook

What is a Webhook?

A webhook is used to send information from one system to another, in real time, as soon as a particular event happens. Rather than checking with an API at certain times, a webhook allows the source system to send data right away to a predetermined location.

For instance, you can use a webhook from Stripe so your application is informed when a payment is successful or unsuccessful. Thanks to this, you can make updates in real time to the order status, send emails or retry logic, with no need for repeated polling.

Webhooks vs. Polling

Criteria

Webhooks

Polling

Communication

Push based (event-driven)

Pull based (interval-driven)

Efficiency

High (send data when needed)

Low (repeatedly checks for update)

Latency

minimal (near real-time)

Higher (depends on polling frequency)

Server load

Low on server side

High on sender side (frequent requests)

Complexity

Requires listener setup

Easier to implement but less scalable

Webhooks and api polling

How Do Webhooks Work?

  1. Registration: At setup, the client application gives the user a URL to a third-party service during setup.

  2. Trigger Event: An event (e.g., user signup, transaction completed) occurs on the third-party platform.

  3. Delivery: The third-party service sends an HTTP POST request to the registered URL with the event’s details.

  4. Processing: The application receiving the request converts it and runs the necessary program.

  5. Response: The receiver signals that the request was received with a 2xx status code

Common Use Cases

  • Payemnt processing: Stripe or RazorPay notifying a system of all the transactions that were completed successfully.

  • CI/CD Pipeliness: GitHub sends out push event data to a build system as part of CI/CD Pipelines.

  • Email Services: SendGrid updates you when your emails are delivered or bounce back.

  • Communication Platforms: On Slack or Discord, bots are activated by messages or user interactions.

Best Practices for Implementing Webhooks

  1. Use HTTPS for safe communication
    All webhook endpoints need to use HTTPS to keep data secure as it travels.

  2. Check the identity of the person making the request
    A signature or token is usually included in the header by most providers. Check the authenticity of the product by validating it.

  3. Ensure Idempotence is followed
    Check that your webhook handler is able to handle duplicate requests without causing harm. This is necessary since certain services try to deliver again if the first attempt fails.

  4. Respond Quickly
    Send a 200 OK status right away to show the request was received. If a lot of processing is involved, handle it later with queues or background workers.

  5. Enter all incoming events into your log
    Record payloads, headers and timestamps for every time a webhook is received. It makes it easier to fix errors and follow compliance rules.

  6. Retries and Dead Letter Queues should be supported
    Delivery of webhooks cannot always be trusted. Either keep retrying the request or have a backup plan on the sending end.

Testing and Debugging Webhooks

  1. Local Development: Bring your local server online by using ngrok and get requests from the webhook.

  2. Provider Test Tools: Test tools are provided by many providers (e.g., Stripe CLI, GitHub Webhooks) to help test your endpoints

  3. Verbose Logging: When testing, log all the data in the request, response and headers to check your integration works correctly.

Common Pitfalls to Avoid

  • Security Issue: Not verifying webhook signatures allows malicious or fake requests to reach your system

  • Blocking Logic in Webhook Handlers: Long processing in a Webhook Handler can end in timeouts or retries. Do your work using asynchronous methods.

  • Insufficient Monitoring: If webhook monitoring is not done enough, it can cause serious effects for the business. Keep an eye on how often webhooks are successfully delivered.

Conclusion

It is easier and more effective to build real-time connections between systems using webhooks. If used wisely, they help workflows move faster, use less infrastructure and offer a better user experience.

Still, webhook consumers should be built keeping security, strength and visibility in mind. Applying best practices and handling common issues early on allows developers and teams to develop integrations that can adapt to the ongoing changes in today’s applications.


Frequently Asked Questions

Q. What is the main difference between webhooks and polling?

A. Webhooks are event-driven and push data in real time, while polling is interval-based and pulls data repeatedly, which increases server load and latency.

Q. Are webhooks secure for real-time communication?

A. Yes, webhooks are secure when you use HTTPS and verify signatures or tokens to authenticate requests and prevent malicious access.

Q. How can I handle failed webhook deliveries?

A. You should support retries and implement dead letter queues to manage failed deliveries and ensure data is not lost in webhook communication.

Explore other blogs

Explore other blogs

let's get in touch

Have a Project idea?

Connect with us for a free consultation !

Confidentiality with NDA

Understanding the core business.

Brainstorm with our leaders

Daily & Weekly Updates

Super competitive pricing

let's get in touch

Have a Project idea?

Connect with us for a free consultation !

Confidentiality with NDA

Understanding the core business.

Brainstorm with our leaders

Daily & Weekly Updates

Super competitive pricing